Model GMRP Caliper Disc Brake | Twiflex

Normally one or two calipers are used per disc, but the number may be increased depending on disc size. The brakes may be positioned at any angle around the periphery of the disc, but should ideally be mounted horizontally (i.e. at the 3 o’clock or 9 o’clock position). If the caliper mounting angle is greater than 10° from the horizontal, or on vertical shaft applications, it should be fitted with an inclined mounting kit.

Product Features

  • Pneumatically-applied,spring-released caliper disk brake can be used for a large variety of propulsion systems,as well as other Naval ship deck applications
  • 8093 lb. (36 kN) Braking force
  • Significantly less downtime for repairs and maintenance
  • Lightweight and modular design,single caliper only weighs 70 lb. (32 kg)
  • Reduced risk of overheating
  • Electronic monitoring including brake-on,brake-off,and pad wear

Contact Info

Twiflex
9 Briar Road, Twickenham
Middlesex TW2 6RB – England
Phone: +44 (0) 20 8894 1161
Fax: +44 (0) 20 8755 5601
Email: info@twiflex.com
www.twiflex.com

Twiflex (USA)
2800 Fisher Road
Wichita Falls, TX 76302
Toll Free: 844-723-3483
Phone: 940-723-3483
Fax: 940-723-3436
Email: twiflex.info@twiflex.com
www.twiflex.com

tf-gmrp-caliper-brake