UpComing Tradeshows

October 23-28, 2017
AIMMGM 2017
Guadalajara, Jalisco, Mexico

October 24-26, 2017
OTC Brazil 2017
Rio de Janairo, Brazil

October 24-26, 2017
Engine Test Expo 2017
Novi, MI

Back To Newsroom

Warner Linear Programmable S-Track Electric Actuators for Excavation Front Loaders

Excavation Front Loader

A major off-highway OEM required reliable actuators for use on a line of excavation front loaders. The actuators remove/re-position large locking pins during routine bucket changes. The actuators needed to be remotely operated from inside the cab to facilitate safe, fast bucket replacement while reducing vehicle downtime.

Warner Linear Programmable S-Track actuators were selected to meet the requirements of this rugged-duty application. Units feature an easy-to-use, integrated keypad which allows operators to set and reset end of travel positions as well as two intermediate stops. Feedback range automatically adjusts to new end position settings.

An S-Track actuator, enclosed in special protective housings (with LEDs and sensors), is mounted on each of the bucket lift arms. Enhanced control allows for 12 or 24 VDC switched power operation of the S-Track actuators by turning power off to the motor automatically when the internal end limits are reached. An integral MP150 Metri-Pack 8-pin molded connector allows several standard input and output features to monitor the operation of the actuator (including motor thermal and current overload protection). State-of-the-art microprocessor-based digital electronic controls using SMT design and manufacturing processes are utilized.

S-Track actuators feature a 400-lb. max. dynamic and static load rating, 0.25″/sec. (1″ no load) speed rating, and a 16″ max. stroke length with end-of-stroke limits. Models shipped with aluminum housings (engineered plastic housings are also available).

Warner Linear S-Track Linear Actuator

Highlights

  • Integrated keypad for fast set/reset of travel positions and two intermediate stops
  • 400-lb. max. dynamic and static load rating
  • Integral MP150 Metri-Pack 8-pin molded connector
  • <56dB noise level
  • Available with aluminum or engineered plastic housings

Contact Information

Warner Linear
31 Industrial Park Road
New Hartford, CT 06057 - USA
Toll Free: 1-800-825-6544
Phone: 815-389-3771
Fax: 815-389-2582
Email: info@warnerlinear.com
www.warnerlinear.com