UpComing Tradeshows

April 22-27, 2017
ISRI 2017
New Orleans, LA

April 23-26, 2017
GCA 2017
Galveston, TX

April 24-28, 2017
Hannover Messe 2017
Hannover, Germany

Back To Newsroom

Support Engineering

Wichita Clutch Engineering Support

Meeting the Challenge of Global Logistics and Support for Large Power Transmission Projects

“The key to supplying and supporting large, operationally critical power transmission equipment on a global basis is a combination of experience, planning and having the right people available on-site virtually anywhere in the world,” says Neil Wright, managing director of Wichita Clutch.

Wichita is part of the Altra Industrial Motion group, which manufactures and supplies a large range of industrial clutches, brakes, couplings and geared motors. As such it can provide valuable insight into how to deliver and support these sometimes huge and usually operationally critical items of plant equipment.

Wright, who is also the managing director of Twiflex Limited, comments on where to locate stock; if point of manufacture matters; what to consider when shipping; and how to manage commissioning and local support. “There are several criteria which come into play when supplying large items of power transmission equipment on a global basis. The ability to both deliver and provide effective technical support for a large item of plant equipment, anywhere in the world, is critical to success. The performance of a supplier on an ongoing basis is also crucial to maintaining a positive working relationship and helping to achieve the customer’s objectives, whether that is to lay a cable across the Atlantic, commission an oil rig, produce steel or even make an island – all of which are applications where Wichita clutches can be found.”

Palm Island Build Equipment

When you manufacture a niche product, the knowledge and machines required to design and manufacture each item, often to a custom specification, have to be concentrated in a limited number of locations. “This means that we have to be highly proficient with our distribution and delivery network, which is why we have a department dedicated to world-wide logistics and have done so for over 50 years. Paperwork requirements vary wildly depending on final destination, so it is essential for us to have continuity in that department, to learn the most effective ways of doing business and to continue to build-up our cache of local knowledge,” adds Wright. “When handling paperwork, communication and coordinating after sales support on a global basis it is essential to have local sales offices in every major country that we sell to. It has been a strategic focus for Altra to have a global network of sales offices across North America, South America, Europe and Asia and therefore it is likely that direct after sales support, from a local speaking national, is never far away.

“For commissioning we predominantly use our own people to complete or oversee a build; we have teams that are trained to handle our products and can travel to most locations in the world. We also have international support engineers that can be deployed locally on all the major continents. We find that having our own people on-site means that we can work more efficiently and any questions can be answered and issues addressed immediately.”

Dredge Pump Drive

When selling smaller, more standardized or commodity based items of power transmission equipment, in-country distribution partners and third party sales support make perfect sense. However, when you are dealing with high-value capital pieces of equipment, where each application is different in some way, then there are too many variables to leave the task to someone who isn’t a total specialist. A good way to illustrate how the organization accommodates both sales and ongoing support is to look at a typical example: Wichita recently designed, manufactured and delivered a large 42” Wichita MSV series marine clutch for a dredging ship. “We have supplied several large clutches to dredging ships before, so there was a degree of accumulated knowledge within the company on this type of application. This one, however, was larger than anything we had produced before,” Wright said.

The clutch couples a three-speed gearbox to a large on-board pump, which is used to provide suction to a trailing hopper that takes-up the river or sea bed and stores it in the ship’s hold. It then changes its operation and is used to empty the hold, either to build-up banks or disperse the material. “Our direct customer is the gearbox manufacturer, so we first started to speak to them about the design and specification of the entire application. In this instance this was the largest version of this arrangement ever produced so it involved us designing a bespoke clutch to meet the specifications of this project. Whether a project is large or small, most products with this type of large power transmission system are custom manufactured to a greater or lesser degree; though often based on an existing design. Proper consultation is absolutely essential and, if we are designing to a specification, then it is always best if we can be involved in forming that specification,” Wright said.

Rotech Tidal Turbine

Being involved in the design process from the outset is a good example of how the organization works around producing a large piece of custom PT equipment. “We know that we have to be able to provide engineering input from an early stage and commit engineering and design resources to the project before we even start planning the design of the clutch itself. This carries a large overhead, as does maintaining our own logistics teams and commissioning engineers, but it also ensures we are profitable by avoiding the pitfalls of misspecification and out of sequence deliveries.”

Once the design and specification process is complete, the company then designs and manufactures the clutch. In the case of the dredger mentioned above, the gearbox assembly will be supplied to the shipyard for integration into the ship, which means supplying essentially a collection of parts to the shipyard. “We will provide an engineer/project manager to oversee the assembly and construction of the clutch and then observe the sea trials to make absolutely sure the equipment is performing as expected,” Wright added. “To many companies this may look like overkill, but there are so many variables in a bespoke build of this scale that we find being on-site means we can react to any potential issues as, or even before, they arise. This helps to minimize any potential problems and ensures the project stays on track for our customer. We also go through a thorough check and sign-off process to make sure we are satisfied that the application is working to its operating parameters.”

Wichita Clutch Tug Boats Oversea Build

“The alternative to these checks can be far more difficult and costly. If we are called to look at an issue which arises while a ship or rig is in service, then this can involve flying out engineers (and sometimes tools and parts) to remote parts of the world, finding connecting transport and then possibly helicopter flights out to the vessel itself. Of course our operatives are fully-trained for such an eventuality, from basic site safety through to working in offshore environments, but if we can catch a problem prior to deployment then that is obviously preferable. Often we find that the root cause is not connected with the clutch, but our primary concern is to help resolve the problem. “When required by our customers we can apply a structured problem solving approach, such as ‘8D,”’ to resolve problems. Using this process we look to identify, correct and eliminate any recurring problems. It then allows us to establish a permanent corrective action based on analysis of the problem; focusing on the origin of the problem and determining its root causes. It is this kind of commitment and attention to detail that we find leads to repeat business – you have to be able to trust and rely on your suppliers, after all.

“Large power transmission projects tend to be by their very nature unsuitable for ‘catalogue solutions’. Our expertise in such applications allows us to add value to the design process: we work with design engineering departments and help to integrate our CAD models with those of the customer so it is possible to drop them straight into the design. This early partnership saves time and reduces project costs before metal is cut.

“Every company works differently, but when selling and supporting heavy duty clutch and brake products throughout the world, we have developed a model that works for our customers. It is a ‘belt and braces’ approach, as we would say in the U.K. -applying engineers early in the process, taking care of the logistics internally and providing sales and support engineers throughout the world (covering China, Russia, Europe, Asia and the Americas) to look after projects directly - but it results in us being an efficient, reliable supplier in a market that has little or no margin for error.”