Back To Newsroom
Warner Electric TB Series Tension Brake & CBC Control for Power Transmission Belt Trimmer
A Mid-Atlantic manufacturer of power transmission belts needed to improve the
tension control within their belt width trimming system. As belts are fed into the
trimmer, a mechanical tension device was used to apply drag on the belts so they
would present a consistent profile to the trimming knives.
The problem was that the simple tension system would wear, which changed its
performance levels. This required ongoing monitoring and adjustment by machine
operators to maintain belt width consistency.
To correct the situation, a 90 VDC hybrid Warner Electric TB-1000 friction brake
was installed along with a CBC-300 manually adjusted controller. Typically,
TB Series brakes are a 24 VDC system. However, by incorporating a 90 VDC brake
magnet with LK facing material, the OEM was able to use a simpler control while
still capturing the long slip life needed in the application. While LK facings have
a lower torque rating than standard facing materials, they last longer in high slip
applications such as this. LK facing material will maintain consistent performance
throughout the life of the brake, eliminating the need for constant adjustments.
Belts are tensioned as they pass over a fixed diameter sheave before they enter
the trim area of the machine. Since more than one belt size is run through the
trimmer, the CBC-300 controller is used to adjust the brake pressure higher or
lower depending upon the tension needs of each belt family. With the new system,
tension is held consistent once a setting is established.
- Brakes are designed for
- Max. dynamic torque
rating of 88 lb.ft.
- Max. speed rating of
- Manually adjustable