Back To Newsroom
Svendborg BSFI Braking Systems with SOBO® for Dam Ship Lift
A reliable braking solution was required for a ship lift constructed at the Three Gorges Dam that
spans the busy Yangtze River near Sandouping, China. The dam is the world’s largest power
station in terms of installed capacity (20,300 MW). The ship lift shortens the time taken for
vessels to pass the dam from three hours to one (actual lifting time is 21 minutes). Used primarily
by passenger ships, the lift functions like an elevator, lifting and lowering vessels vertically 113 m
(370 ft.) to upstream and downstream water levels. With a useable space of 120 x 18 x 3.5 m
and a 3,000 tonne capacity, the lift is the largest of its type in the world.
The lift utilizes four pinions that act on tooth racks within the lifting towers. Each pinion is driven
by two electric motors and lifts a series of 64 cables (74 mm [3 in.] diameter) that are attached to
suspended concrete counterweights.
The lift’s braking system required accurate deceleration and very precise synchronization of the
four pinion drive units. The lift’s mechanical deck equipment OEM contacted all major global
brake manufacturers regarding this challenging project. Ultimately, Svendborg Brakes was
selected because its package of highly reliable caliper brakes and hydraulic units, combined with
the SOBO® braking control, matched the demanding application requirements.
Svendborg Model 200 disc caliper dual-spring brakes, positioned between the motor and gearbox
on each drive unit, are used for high-speed emergency stopping. Model 300 dual-spring brakes,
positioned on the opposite side of the gearbox, are used as parking brakes.
- Model BSFI 207 brakes provide 1800 Nm of torque and act on a 500 mm dia. disc.
- Model BSFI 330 brakes provide 13000 Nm of torque and act on a 900 mm dia. disc.
- Model BSFI 207 brakes
provide 1800 Nm of torque
- Model BSFI 330 brakes
provide 13000 Nm of torque
- Unique SOBO soft-braking
- Custom hydraulic power