Back To Newsroom
Marland BCMA Backstops and Svendborg BSFI Caliper Brakes for Coal Mine Conveyor System
Robust braking and holdback solutions were required for use on a conveyor system at Sasol’s
Impumelelo coal mine expansion project in South Africa. The multi-conveyor system includes a
26.9 km (16.7 mile) long overland conveyor, one of the longest single-flight conveyors in the
country, that transports the coal from the mine to a distant storage bunker facility.
The conveyor OEM contacted Svendborg Brakes based on previous successful mine conveyor
collaborations. While discussing the braking package specifications, it was determined that
Marland Clutch, another Altra Industrial Motion company, could provide the conveyor system’s
required backstops. The OEM was aware of Marland’s industry-wide reputation for designing and
manufacturing rugged, reliable backstopping clutch solutions.
To meet the challenging application requirements, Svendborg supplied BSFI 360 DS Series
dual-spring caliper brakes with 47,941 ft.lbs. (65,000 Nm) braking torque for use on the conveyor
system’s midstation pulley. BSFI 325 models with 19,914 ft.lbs. (27,000 Nm) braking torque were
utilized on the high-speed shafts of both the midstation and head drive gearboxes.
Marland provided various sized backstops for the conveyor system including, Model BC-45MAs
with 45,000 ft.lbs. (61,012 Nm) holding torque for the tippler conveyors and BC-375MA models
with 375,000 ft.lbs. (508,432 Nm) torque rating for use on the inclined conveyor. A model BC-90MA
with 90,000 ft.lbs. (122,024 Nm) torque rating was utilized on the bunker feed conveyor.
Similar brake and clutch powertrain components were supplied for conveyors at the Sasol’s
Shondoni mine expansion, also located in South Africa.
BSFI 300 DS Series Brakes
- Fail-safe, spring-applied,
- Two sets of spring packs
allow for longer intervals
between required brake
- Highest reliability
- Self-lubricated, sealed
- 20-year, 24/7/365
typical service life
- Full torque load testing