Back To Newsroom
Warner Electric Custom E220 Clutch for Locomotive Hybrid Transmission
A major European manufacturer of power transmission systems for locomotives
approached Warner Electric engineers with a request for a customized clutch to
integrate with its new hybrid transmission. The clutch is positioned between the
electric drive system and the diesel engine on the hybrid drive. The clutch allows the
diesel engine drive to engage when the electric drive’s battery power is low.
A special clutch design was necessary because of a very tight set of application
parameters, including high speeds (up to 3,000 rpm) and high torque (up to
5,000 Nm). An operating life of over 50,000 hours without maintenance was
required since the clutch would be enclosed in a housing as part of the transmission,
making access nearly impossible. The housing also meant that the clutch would be
exposed to extreme operating temperatures and required to operate reliably in
ambient temperatures ranging from -40°C to 100°C.
The engineers at Warner Electric worked closely with the customer to develop a
customized E220 electromagnetic clutch to meet the challenging locomotive
application requirements. The E220 range of power-activated, zero-backlash clutches
is designed for embedded applications and is particularly suited to hybrid transmissions
where no residual torque can be transmitted when the clutch is disengaged.
A tolerance of +/-30% on the pilot voltage of the clutch was included and a stabilizing
system was implemented to avoid any unforeseen engagement. Sealed bearings and
a specialized friction face material were added for longevity without maintenance.
- Customized E220
- Max. torque rating of
3685 lb.ft. (5000 Nm)
- Max. speed rating of
- Compact design
- 50,000 hour operating
life without maintenance
- Specialized friction face
- Sealed bearings
- -40°C to 100°C