UpComing Tradeshows

August 22-25, 2017
Fenasucro 2017
Sertãozinho,São Paulo- Brazil

August 29-30, 2017
AIMEX 2017
Sydney, Australia

September 11-15, 2017
DRINKTEC 2017
Messe Munchen, Germany

Back To Newsroom

Huco coupling demonstrates durability in tractor transmission

Harvester The CLAAS Group is one of the world’s leading providers of harvesters, tractors, sowing machinery and agricultural systems

Huco Dynatork is supplying CLAAS Industrietechnik with its multi-beam couplings for use in a power-split transmission for its newest range of ARION 500/600 series tractors. Having identified a contamination issue caused by the ‘as-machined’ delivery condition of many manufacturers’ standard couplings, CLAAS Industrietechnik approached Huco for a specialised solution which would perform reliably.

The CLAAS Group is one of the world’s leading providers of harvesters, tractors, sowing machinery and agricultural systems. As part of the CLAAS Group, the 100% subsidiary CLAAS Industrietechnik GmbH is an independent, medium-sized industrial company that focuses on drive technology including gearboxes and hydraulics. CLAAS Industrietechnik products are used both within the CLAAS Group and, increasingly, in a wide variety of sectors involving many other customers. The company is based in Paderborn, Germany and employs about 600 employees to produce solutions which are world renowned for being robust, lightweight and durable.

CLAAS EQ200

For the latest ARION 500/600 series tractor, the CLAAS engineers developed the EQ200, continuously variable transmission.

For the latest ARION 500/600 series tractor, the CLAAS engineers developed the EQ200, continuously variable transmission. This particular transmission exhibits a high level of efficiency – more or less constantly at any speed – thanks to a combination of two variable axial-piston pumps, stepped planetary gearset and a double-clutch unit. Gear changes are possible – even under load – without abruptly increasing speed and torque, which leads to consistently steady acceleration from 0 to 50 kph. Furthermore, the tractor can be driven at a top speed of 50kph with fuel-saving engine speeds of only 1500 rpm.

"The EQ200 is a power-split transmission and the function of the coupling is to transmit rotation from the electric positioning motor to the hydrostatic module." explains Thomas Kottmann, member of the purchasing department at Paderborn. "The coupling has to provide elastic transfer of the forces and, because it’s operating in a hydraulic system, we need very clean parts."

Huco Multi-Beam Cleaning Service

Huco was able to offer its stainless steel multi-beam coupling complete with a full deburring and cleaning service.

Huco Dynatork, part of Altra Industrial Motion, is a leading manufacturer of small precision couplings. Its engineers were immediately able to recommend its multi-beam couplings to perform as required within the gearbox. The coupling’s helical-cut design provides a higher torque capability and reduced backlash when compared to single beam couplings and will readily accommodate axial motion and angular & parallel misalignment. Most couplings stocked by traders, merchants and catalogue parts specialists are supplied in the as-machined condition, meaning that they aren’t treated post-production to remove all possible contaminants. While this is fine for the vast majority of coupling applications, for hydraulic transmission applications this can have serious consequences for the reliability of the system.

"Such couplings can present problems to a hydraulic gearbox. For example swarf and chips will likely be present from the machining of the beams," says Mr Kottmann. "However, by approaching Huco directly, we received an excellent solution to this issue. Huco was able to offer its stainless steel multi-beam coupling complete with a full deburring and cleaning service. As a result, we do not have any issues with swarf or metal chips contaminating the hydraulic system."

Tractor CLAAS EQ200 Transmission

Today, the CLAAS EQ200 transmission system is widely regarded as one of the best for tractors in the 140hp to 184hp range

Commenting on the flexibility of Huco Dynatork, brand Managing Director, David Lockett, adds: “We’re always happy to work with our customers to deliver a special service or solutions that will improve their experience of our product. We’ve invested heavily in our Lean manufacturing capabilities, and this allows us to tailor our delivery for orders of any size. By offering the cleaning service to CLAAS Industrietechnik, we were able to help them ensure the reliability of their product and protect their reputation.” The first prototypes of the CLAAS EQ200 transmission were assembled in 2008. Today, the transmission system is widely regarded as one of the best for tractors in the 140hp to 184hp range, which has helped the ARION 500/600 become a leader in its field.