Back To Newsroom
Boston Gear Series 2000 Inline Drive for Coal Mine Stacker
A coal mine needed a new drive for the rope winch on its stockyard stacker. Coal is
fed into the rail-mounted machine via a conveyor. The machine slowly moves down the
track as it deposits the coal into stacks via a boom-mounted conveyor. Ropes/cables
are used to luff (raise and lower) the boom as the height of the stockpile changes.
A winch is used to draw the heavy-duty cable (rope) from the drum and pull it through
the machine’s conveyor boom sheaves during routine rope replacement operations.
The speed reducer is positioned between the electric drive motor and the winch
To meet the application requirements, Boston Gear recommended a Series 2000
helical inline gear drive. The double reduction model has a NEMA C-Face motor input
with a 3-Jaw coupling. Machined mounting registers allow for quick alignment so
installation is fast and easy. The rugged cast iron housing with heavy-duty ground
steel gears are designed to withstand adverse mine conditions.
- Efficiency of 98% per
- High-ratio reductions
- Steel-hardened, ground
and polished helical gears
- Magnetic entrapment of
metallic wear debris
provides maximum life