UpComing Tradeshows

March 20-22, 2018
GCA 2018
Galveston, TX

March 20-23, 2018
Anuga FoodTec 2018
Cologne, Germany

March 27-29, 2018
CIPPE 2018
Beijing, China

Back To Newsroom

Boston Gear Centric® Centrifugal Clutch for Mine HVAC System

Mine HVAC System

A global mine ventilation equipment manufacturer needed an overload clutch solution for a large fan drive application. Fans are used to drive fresh air into a downcast shaft while the large diameter main fans draw out old air from the mine through an upcast shaft. Booster fans are positioned within the mine as needed to maintain optimum air flow. This powerful through-flow air ventilation system plays a critical role in mine safety as it reduces dangerous gases, dust, and high heat levels inside the mine.

The main dual-drive fan is primarily powered by an electric motor running at 1800 rpm. If power is lost, a diesel (or gas) engine, running at 900 rpm is utilized. The clutch is positioned on the diesel engine side of the fan, between the necessary speed increasing gearbox and the fan shaft. The electric motor is positioned on the opposite side of the fan.

During a power failure, when the electric motor shuts down, the clutch automatically engages the diesel engine driveshaft connected to the fan to ensure that continuous air flow into the mine is maintained.

Boston Gear supplied 19 in. and 24 in. diameter Centric Centrifugal Clutches (CCC) to meet the challenging OEM fan drive application requirements. Springloaded CCC units are designed to automatically engage and disengage at customer specified RPMs.

Centric Centrifugal Clutch


  • Dual-drive clutch application
  • Automatic engagement and disengagement
  • Protection against shock loads

Contact Information

Boston Gear
701 Carrier Dr.
Charlotte, NC 28216
Phone: 1-800-825-6544
Email: info@bostongear.com