UpComing Tradeshows

September 04-07, 2018
SMM 2018
Hamburg, Germany

September 10-14, 2018
Electra Mining Africa 2018
Johannesburg, South Africa

September 18-20, 2018
Turbomachinery 2018
Houston, TX

Back To Newsroom

Bauer Custom BK Series Geared Motors for Onion Bin Dumper

Bauer Gear BK Series for Onion Bin Dumper

A major U.S. food processing OEM required a robust gear motor solution for use on its onion bin dumpers. The shaft-mounted geared motors lift and dump heavy, loaded onion bins into hopper-fed conveyors for further sorting and processing.

The customer had considered a chain drive as a secondary drivetrain in order to reduce the size of the primary geared motor. Bauer engineers pointed out that the savings from the smaller, lower cost geared motor would be quickly exceeded by the costs to fabricate a structure to support the chain drive and related support bearings. Plus, the chain drive would require a cover. All these costs would be eliminated by using a Bauer shaft-mounted geared motor.

Bauer worked closely with the OEM to demonstrate the torque required for the heavy bin dumper. Bauer engineers also suggested using a shrink disc, which eliminated the need for a keyway. The shrink disc provides zero slip between the shaft and the geared motor in both directions of rotation.

Modified BK80 geared motors providing 96,000 in.lbs. (10,846 Nm) of torque were supplied to exceed the 90,000 in.lb. torque application requirements. The loaded bin would be stopped occasionally during the lifting operation, so a single-disc brake with a 177 in.lb. (20 Nm) torque rating was incorporated to hold the load. A torque arm was also provided. The bin dumper would be subjected to sporadic water spray washdowns so a CORO1 epoxy coating was applied to the entire geared motor.

The BK80 units performed well during OEM testing for the end user which included lifting, lowering, e-stops and other operational criteria.

Bauer BK Series Geared Motor


  • Custom BK Series helical bevel geared motors
  • Torque rating:
    96,000 in.lbs. (10,846 Nm)
  • Hardened wear sleeve and spray ring
  • Complies with NA and International standards, including NEMA, IEC, CSA and CE
  • Single-disc holding brake with a 177 in.lb. (20 Nm) torque rating
  • IP65 Enclosure (Standard)
  • Completely enclosed, sealed against dust and moisture
  • CORO1 epoxy coating corrosion protection
  • Torque arm provided

Contact Information

Bauer Gear Motor GmbH
Eberhard-Bauer-Straße 37
73734 Esslingen - Germany
Phone: +49 (711) 3518-0
Email: info@bauergears.com