UpComing Tradeshows

March 27-29, 2019
CIPPE 2019
Beijing, China

April 06-11, 2019
ISRI 2019
Las Vegas, NV

April 08-14, 2019
BAUMA 2019
Munich, Germany

Back To Newsroom

Wichita GMC Grinding Mill Clutches for Fertilizer Plant Ball Mills

Fertilizer Plant Ball Mills

One of China’s largest chemical/fertilizer producers was experiencing unusually high failure rates of the clutches installed on three ball mills at its processing facility. The clutch’s friction discs needed to be replaced every six months which was a very costly and labor intensive problem.

In late 2018, the facility operators decided to undertake a complete renovation of the mills, including the replacement of the clutches, to rectify the unsustainable situation. They contacted five different clutch manufacturers for proposals. Wichita Clutch, along with its local distributor partner, recommended the installation of reliable Model 342 Grinding Mill Clutches (GMCs) on all three mills. Since Wichita was not a well-recognized brand in the Chinese chemical phosphorite industry, a customer tour of a nearby facility where Wichita clutches were successfully installed was arranged. After the tour and a review of all the clutch proposals, the customer ultimately selected the Wichita Clutch solution based on competitive pricing and a high level of trust.

Wichita Model 342 GMC units with 42 in. diameter friction discs have a torque rating of 2,898,070 in.lbs. (327,437 Nm). The air-applied GMCs are specially designed to provide quick, smooth starts with limited current surge on geared grinding mills with large inertia loads. Wichita GMC models are equipped with a driving adapter that is designed to allow the clutch to be used in a shaft-to-shaft or through-shaft coupling arrangement. A quick-change feature enables replacement of any wearing clutch part without disturbing either shaft. GMC units also utilize a special high energy absorbing, high-coefficient friction material for greater heat dissipation during mill jogging and inching operations.

GMC Grinding Mill Clutches

Highlights

  • Air-applied clutch with full-circle friction discs
  • Torque capacity not affected by centrifugal force
  • High-coefficient, high energy absorbing friction material
  • High heat dissipation for jogging and inching during routine maintenance
  • Quick-change ring allows easier access to friction discs
  • No adjustment or lubrication required

Contact Information

Wichita Clutch (USA)
2800 Fisher Rd.
Wichita Falls, TX 76302 - USA
Toll Free: 1-800-964-3262
Phone: 940-723-3400
Fax: 940-723-3436
Email: wichita.info@wichitaclutch.com
www.wichitaclutch.com

Wichita Clutch (UK)
Ampthill Road
Bedford MK42 9RD - England
Phone: +44 (0) 1234 350311
Fax: +44 (0) 1234 350317
Email: clutch@wichita.co.uk
www.wichita.co.uk