UpComing Tradeshows

October 15-18, 2019
Interlift 2019
Augsburg, Germany

October 16-19, 2019
GIE+EXPO 2019
Louisville, KY

October 16-18, 2019
China Wind Power 2019
Beijing, China

Back To Newsroom

Formsprag Starter Clutches for Gas Turbines

Gas Turbines

A leading gas turbine system OEM needed a reliable clutch solution for use on an electric starting system. The system utilizes an electric motor combined with an overrunning clutch. When starting, the electric motor rotates the main turbine shaft until the air blowing through the turbine’s compressor and combustion chamber is sufficient to light the engine. Once the engine reaches a self-sustaining speed, the overrunning clutch automatically disengages the electric starting motor.

To meet the OEM’s requirements, Formsprag Clutch provided its Model FTS-2500 clutch, designed specifically for turbine starter applications to provide a smooth transfer of power from the electric starter motor to the engine.

Formsprag turbine starter overrunning clutches feature centrifugal throw-out (C/T)sprag technology. In the outer race centrifugally disengaging sprag design, the mass of the sprag is located so that when the outer race is overrunning, the centrifugal force of the sprags overcomes the force of the energizing spring, causing the sprags to completely “pull away” from the inner race. The primary advantage of the C/T sprag design is that when the sprags lift off the inner or outer race, there is no rubbing contact in the clutch, which significantly improves the life of the clutch.

The Model FTS-2500 has a drive torque of 330 lb.ft., 4,800 RPM drive speed and 11,000 RPM overrunning speed. Custom mounting flanges were engineered to meet the customer’s specifications. An 11 in. OD, specially designed splined output shaft was included. All Formsprag turbine starter clutches are manufactured and assembled in an AS 9100D/ISO-9001:2015 certified factory.

Starter Clutches

Highlights

  • Model FTS-2500 overrunning turbine starter clutches
  • Centrifugal throw-out (C/T) sprag technology for longer life
  • 330 lb.ft. drive torque
  • 4,800 RPM drive speed
  • 11,000 RPM overrunning speed
  • 11 in. OD
  • Custom splined output shaft
  • Custom mounting flanges
  • AS 9100D/ISO-9001:2015 certified factory

Contact Information

Formsprag Clutch
23601 Hoover Rd.
Warren, MI 48089 - USA
Toll Free: 1-800-348-0881 (Press #1)
Phone: 586-758-5000
Fax: 586-758-5204
Email: info@formsprag.com
www.formsprag.com