UpComing Tradeshows

October 22-25, 2019
Cibus Tec 2019
Parma, Italy

November 01-03, 2019
WINDERGY INDIA 2019
Uttar Pradesh, India

November 10-16, 2019
Agritechnica 2019
Hanover, Germany

Back To Newsroom

Formsprag Model SB Backstopping Clutch for Auto Plant Water Pump

Mobile Plant Assembly

A large auto manufacturer was experiencing problems with the check valves on an electric motor driven packaged water pump arrangement at one of its Midwestern assembly plants. When the valves did not work properly, water backflow would drive the pumps impeller and motor in the wrong direction, causing powertrain damage when the pumps were re-started.

The facility manager wanted an alternative mechanical device that would prevent the pump from running backwards.

After a comprehensive review of the customer application, Formsprag Clutch engineered and manufactured a custom ball bearing supported Model SB-600 backstopping clutch. The SB-600 is designed specifically to prevent potentially damaging backflow on pump applications when the pump is shut down.

The custom clutch supplied was retrofitted onto the existing motor shaft without requiring any special/new drivetrain components. This greatly reduced the cost of on-site modifications. The oil-lubricated SB-600 model features a compact length with a 1,600 lb.ft. (2176 Nm) torque capacity.

Formsprag Model SB Backstopping Clutches

Highlights

  • 1600 lb.ft. (2176 Nm) torque capacity
  • Oil-lubricated
  • Requires no adjustments or controls

Contact Information

Formsprag Clutch
23601 Hoover Rd.
Warren, MI 48089 - USA
Toll Free: 1-800-348-0881 (Press #1)
Phone: 586-758-5000
Fax: 586-758-5204
Email: info@formsprag.com
www.formsprag.com